Searching For A Recording By Index - Index Search - Sony Handycam DCR-VX2100E Operating Instructions Manual

Searching for a
recording by index
– Index search
You can automatically search for the point
where an index is marked and start playback
from that point (Index search). Use a tape
with cassette memory for convenience. Use the
Remote Commander for this operation.
Use this function to check where indexes are
marked or to edit the tape at each sequence
where the index is marked.
Searching for the index point
using cassette memory
You can use this function only when playing
back a tape with cassette memory (p. 210).
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in
settings (p. 156). The default setting is ON.
(3) Press SEARCH MODE on the Remote
Commander repeatedly, until the index
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t
DATE SEARCH t PHOTO SEARCH t
PHOTO SCAN t no indicator
(4) Press . or > on the Remote
Commander to select the index point for
playback.
Your camcorder automatically starts
playing back at the selected index point.
1
POWER
to ON in the menu
(1)
(2)
(3)
t
t
t
(4)
.
3
SEARCH
MODE
4
t
t
>
INDEX SEARCH
CH
1 5 / 9 / 03 1 7 : 30 CAM
2 6 / 9 / 03 8 : 50 LINE
3 24 / 12 / 03 10 : 30 CAM
CAM
4 1 / 1 / 04 23: 25
5 11 / 2 / 04 1 6 : 11 CAM
6 29 / 4 / 04 1 3 : 45 CAM
INDEX SEARCH
CH
1 5 / 9 / 03 1 7 : 30 CAM
2 6 / 9 / 03 8 : 50 LINE
3 24 / 12 / 03 10 : 30 CAM
4 1 / 1 / 04 23: 25 CAM
5 11 / 2 / 04 1 6 : 11 CAM
6 29 / 4 / 04 1 3 : 45 CAM
95