Marking An Index - Sony Handycam DCR-VX2100E Operating Instructions Manual

Marking an Index

If you mark an index at the scene you want to
search for, you can easily search for the scene
later (p. 95).
In recording mode [a]:
Press INDEX MARK.
The "INDEX MARK" indicator appears on the
LCD screen or in the viewfinder for seven
seconds and the index is marked after the
indicator disappears.
In standby mode [b]:
Press INDEX MARK.
The "INDEX STBY" indicator appears on the
LCD screen or in the viewfinder. And when
you press START/STOP to start recording, the
"INDEX STBY" indicator changes to "INDEX
MARK" and after the indicator disappears, the
index marking is complete.
The camcorder starts index-marking at the
11th frame from the recording start point. An
index signal will be recorded on cassette
memory about 0.3 sec, and on a tape about five
seconds.
You can mark an index in VCR mode (p. 131).
[a] [b]
STBY
REC
I NDEX
STBY
INDEX MARK
I NDEX
REC
MARK
I NDEX
MARK
91