Using With An Analog Video Unit And A Pc - Signal Convert Function - Sony Handycam DCR-VX2100E Operating Instructions Manual

Using with an analog
video unit and a PC –
Signal convert function
You can convert the analog input signal to the
digital signal and output it from the DV
Interface on this camcorder. You can capture
images and sound from an analog video unit
connecting a PC which has the i.LINK
(IEEE1394) connector to your camcorder.
: Signal flow/
(1) Set the POWER switch to VCR.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select
A/V t DV OUT, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select
ON, then press the dial.
(6) Press MENU to erase the menu display.
(7) Start playback on the analog video unit
slightly ahead of the point from which you
want to start capturing images.
(8) Start capturing procedures on your PC. The
operation procedures depend on your PC
and the software which you use.
For details on how to capture images, refer
to the instruction manual of your PC and
your software.
128
S VIDEO
S VIDEO cable (optional)/
i.LINK (IEEE1394)
OUT
A/V connecting cable (supplied)/
I.LINK cable (optional)/
(1)
(2)
(3)
(4)
t
(5)
(6)
(7)
(8)
S VIDEO
VIDEO
AUDIO