Audio Dubbing - Sony Handycam DCR-VX2100E Operating Instructions Manual

Audio dubbing

You can record an audio sound to add to the
original sound on a tape by connecting audio
equipment or a microphone. If you connect
audio equipment, you can add sound to your
recorded tape by specifying the starting and
ending points. The original sound will not be
erased. You can also use the Remote
Commander for this operation.
Connecting the microphone
with the MIC jack
MIC (PLUG IN POWER)
: Signal flow/
You can check the picture on TV by connecting
with the video jack. You cannot monitor the
additional sound by the speaker. Use the
headphone jack.
MIC LINE
Set the MIC/LINE
switch to MIC./
Microphone (optional)/
137