Sony Handycam DCR-VX2100E Operating Instructions Manual page 124

Dubbing only desired scenes
– Digital program editing
(6) Press the SEL/PUSH EXEC dial, or MARK
on the Remote Commander.
The CUT-IN point of the first program is
set, and the top part of the program mark
changes to light blue.
(7) Search for the end of the first scene you
want to insert using the video operating
buttons, then pause playback (p. 44).
(8) Press the SEL/PUSH EXEC dial, or MARK
on the Remote Commander.
The CUT-OUT point of the first program is
set, then the bottom part of the program
mark changes to light blue.
(9) Repeat steps 5 to 8, then set the program.
When the program is set, the program mark
changes to light blue.
You can set a maximum of 20 programs.
7
STOP REW
On a blank portion of the tape
You cannot set CUT-IN or CUT-OUT on a
blank portion of the tape.
Note
The total time of the programs is indicated on
the LCD screen or in the viewfinder, however,
if the time code on the tape is not continuous,
the time may not be indicated properly.
124
PLAY FF PAUSE
(6)
(7)
(8)
(9)
6
8,9
V I DEO ED I T 0:09:07:06
MARK 2 I N
UNDO
ERASE AL L
START
TOTAL 0:00:12:13
SCENE 1
[ MENU ] : END
V I DEO ED I T 0:08:55:06
MARK 1 OUT
UNDO
ERASE AL L
START
TOTAL 0:00:00:00
SCENE 0
[ MENU ] : END
V I DEO ED I T 0:10:01:23
MARK 4 I N
UNDO
ERASE AL L
START
TOTAL 0:00:47:12
SCENE 3
[ MENU ] : END