Sony Handycam DCR-TRV75E Operating Instructions Manual page 227

Changing the menu settings
Icon/item Mode
VCR SET
HiFi SOUND
z STEREO
AUDIO MIX
A/V t DV OUT z OFF
NTSC PB z ON PAL TV
LCD/VF SET
LCD B.L. z BRT NORMAL
LCD COLOUR
VF B.L.
z BRT NORMAL
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Notes on LCD B.L. and VF B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, BRIGHT is automatically selected.
Even if you adjust LCD B.L., LCD COLOUR and VF B.L.
The recorded picture will not be affected.
Meaning
To play back the stereo tape or dual sound track tape
with main and sub sound (p. 269)
1 To play back the stereo tape with the left sound or the
dual sound track tape with main sound
2 To play back the stereo tape with the right sound or the
dual sound track tape with sub sound
—— To adjust the balance between stereo 1 and stereo 2
(p. 122)
To output digital images and sound in analog format
using your camcorder
ON To output analog images and sound in digital format
using your camcorder (p. 218)
To play back a tape recorded in the NTSC colour
system on a PAL system TV
NTSC 4.43 To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
To set the brightness on the LCD screen normal
BRIGHT To brighten the LCD screen
—— To adjust the colour on the LCD screen with r/R
Low intensity
To set the brightness on the viewfinder screen to
normal
BRIGHT To brighten the viewfinder screen
ST1 ST2
High intensity
(continued on the following page)
POWER
switch
227