Sony DCR-TRV7 Operating Instructions (English and Spanish) Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. DCR-TRV7 (English and Spanish)
  6. Operating instructions manual
Sony DCR-TRV7 Operating Instructions (English and Spanish) Operating Instructions Manual

Sony DCR-TRV7 Operating Instructions (English and Spanish) Operating Instructions Manual

Digital video camera recorder
Hide thumbs Also See for DCR-TRV7 Operating Instructions (English and Spanish):
Table of Contents

Advertisement

Quick Links

Digital Video
Camera Recorder

Operating Instructions

Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Manual de instrucciones
Antes de utilizar la unidad, lea este manual atentamente y
consérvelo para realizar consultas en el futuro.
Owner's Record
The model and serial numbers are located on the bottom. Record
the serial number in the space provided below. Refer to these
numbers whenever you call upon your Sony dealer regarding this
product.
Model No. DCR-TRV7
Serial No.
DCR-TRV7
©1997 by Sony Corporation
Model No. AC-V316
Serial No.
3-859-517-13 (1)

Advertisement

Table of Contents
loading

Related Manuals for Sony DCR-TRV7 Operating Instructions (English and Spanish)

Summary of Contents for Sony DCR-TRV7 Operating Instructions (English and Spanish)

  • Page 1: Operating Instructions

    Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DCR-TRV7 Model No. AC-V316 Serial No.
  • Page 2 For the Sony Service Center nearest you call 1-800-222-SONY (United States only). For the SONY Factory Service Center nearest you call 416-499-SONY (Canada only). Caution: Do not handle damaged or leaking lithium ion batteries.

  • Page 3: Table Of Contents

    Table of contents Before you begin Using this manual 4 Checking supplied accessories 6 Getting started Charging and installing the battery pack 7 Inserting a cassette 11 Basic operations Camera recording 12 Using the zoom feature 15 Selecting the start/stop mode 16 Shooting with the LCD screen 17 Letting the subject monitor the shot 18 Hints for better shooting 20...

  • Page 4: Before You Begin Using This Manual

    Before you begin Using this manual Welcome Congratulations on your purchase of this Sony Handycam Vision your Handycam Vision, you can capture life’s precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use.

  • Page 5: Precaution On Copyright

    Using this manual Precaution on copyright Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provision of the copyright laws. Precautions on camcorder care •The LCD screen and/or the color viewfinder are manufactured using high-precision technology.

  • Page 6: Checking Supplied Accessories

    Checking supplied accessories Check that the following accessories are supplied with your camcorder. 1 Wireless Remote Commander (1) (p. 113) 2 NP-F530 battery pack (1) (p. 7) 3 AC-V316 AC power adaptor (1) (p. 7, 27) The shape of the plug varies from region to region.

  • Page 7: Getting Started

    “InfoLITHIUM”. Si utiliza otro tipo de pila, es posible que dicha videocámara no funcione o que la duración de la pila se reduzca. “InfoLITHIUM” es una marca comercial de Sony Corporation. Carga del paquete de batería Cárguelo sobre una superficie plana y sin vibraciones.
  • Page 8 Charging and installing the battery pack Charging time Battery pack NP-F530 (supplied) NP-F730 NP-F930 The time required for a normal charge is indicated in parentheses. * Approximate minutes to charge an empty battery pack using the supplied AC power adaptor. (Lower temperatures require a longer charging time.) Battery life While using with viewfinder...
  • Page 9 Charging and installing the battery pack Notes on remaining battery time indication during recording •Remaining battery time is displayed in the viewfinder or on the LCD screen. However, the indication may not be displayed properly, depending on using conditions and circumstances.

  • Page 10: Installing The Battery Pack

    Charging and installing the battery pack Installing the battery pack (1) Lift up the viewfinder. (2) Insert the battery pack in the direction of the $ mark on the battery pack. Slide the battery pack down until it fits in. Attach the battery pack to the camcorder securely.

  • Page 11: Inserting A Cassette

    Inserting a cassette You can use mini DV cassette with only. Make sure that the power source is installed. (1) Slide OPEN/EJECT near the grep strap in the direction of the arrow and open the lid. The cassette compartment automatically lifts up and opens.

  • Page 12: Basic Operations Camera Recording

    Basic operations Camera recording Make sure that the power source is installed and a cassette is inserted and that the START/STOP MODE switch inside the LCD panel is set to Before you record one-time events, you may want to make a trial recording to make sure that the camcorder is working correctly.
  • Page 13 Camera recording To stop recording momentarily [a] Press START/STOP. The “STBY” indicator appears in the viewfinder (Standby mode). To finish recording [b] Press START/STOP again to stop recording. Set the POWER switch to OFF. Then, eject the cassette and remove the battery pack. To focus the viewfinder lens If you cannot see the indicators in the viewfinder clearly, or after someone else has used the...
  • Page 14 •When you record in LP mode, we recommend you to use a Sony Excellence/Master mini DV cassette so that you can get the most out of your camcorder. •You cannot make audio dubbing on a tape recorded in LP mode.

  • Page 15: Using The Zoom Feature

    Camera recording Using the zoom feature Zooming is a recording technique that lets you change the size of the subject in the scene. For more professional-looking recordings, use the zoom function sparingly. “T” side: for telephoto (subject appears closer) “W” side: for wide-angle (subject appears farther away) Zooming speed (Variable speed zooming)

  • Page 16: Selecting The Start/Stop Mode

    Camera recording Notes on digital zoom •More than 10x zoom is performed digitally, and the picture quality deteriorates as you go toward the “T” side. If you do not want to use the digital zoom, set the D ZOOM function to OFF in the menu system.

  • Page 17: Shooting With The Lcd Screen

    Camera recording To extend the recording time in 5SEC mode Press START/STOP again before all the dots disappear. Recording continues for about 5 seconds from the moment you press START/ STOP. Note on 5SEC recording If you have turned off the indicators on the LCD screen, the dots do not appear.

  • Page 18: Letting The Subject Monitor The Shot

    Camera recording Notes on the LCD panel •When closing the LCD panel, turn it vertically until it clicks [a]. •When turning the LCD panel, turn it always vertically; otherwise, the camcorder body may be damaged or the LCD panel may not close properly [b].
  • Page 19 Camera recording To cancel mirror mode Turn the LCD panel down toward the camcorder body. Notes on mirror mode •When you turn the LCD panel about 90 degrees to 210 degrees, the camcorder enters mirror mode. •Using the mirror mode, you can record yourself while watching yourself on the LCD [a].

  • Page 20: Hints For Better Shooting

    Hints for better shooting For hand-held shots, you will get better results by holding the camcorder according to the following suggestions: •Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb. [a] •Place your elbows against your side.
  • Page 21 Si dispone de un trípode para cámara fija, también puede utilizarlo con la videocámara. Si fija un trípode que no sea Sony, compruebe que la longitud del tornillo del trípode sea inferior a 6,5 mm (9/32 pulgadas). En caso contrario, no será...

  • Page 22: Checking The Recorded Picture

    Checking the recorded picture Using the EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder. (1)While pressing the small green button on the POWER switch, set it to CAMERA. (2)Press the РΠside of EDITSEARCH momentarily;...

  • Page 23: Playing Back A Tape

    Playing back a tape You can monitor the playback picture on the LCD screen or in the viewfinder. (1) Insert the recorded tape with the window facing out. (2) While pressing PUSH OPEN, open the LCD panel. (3) While pressing the small green button on the POWER switch, set it to VTR.

  • Page 24: Various Playback Modes

    Playing back a tape To display the LCD screen/viewfinder screen indicators Press DISPLAY. To erase the indicators, press again. Notes on screen indicators •The screen indicator disappears when the title is displayed. •When you play back a tape using a “InfoLITHIUM”...
  • Page 25 Playing back a tape To view the picture at double speed For double speed playback in the reverse direction, press <, then press 2 on the Remote Commander during playback. For double speed playback in the forward direction, press >, then press 2 during playback.

  • Page 26: Searching For The End Of The Picture

    Searching for the end of the picture You can go to the end of the recorded portion after you record and play back the tape. The tape starts rewinding or fast-forwarding and the last about 5 seconds of the recorded portion plays back.

  • Page 27: Advanced Operations Using Alternative Power Sources

    Battery pack NP-F530 pack (supplied), NP-F730, NP-F930 In the car 12 V or Sony car battery charger 24 V car DC-V515A battery Note on power sources Disconnecting the power source or removing the battery pack during recording or playback may damage the inserted tape.

  • Page 28: Using A Car Battery

    Using a car battery Use a car battery charger such as Sony DC- V515A (not supplied). Connect the car battery cord to the cigarette lighter socket of a car (12 V or 24 V).

  • Page 29: Changing The Mode Settings

    Changing the mode settings You can change the mode settings in the menu system to further enjoy the features and functions of the camcorder. (1) Press MENU to display the menu on the LCD screen. (2) Turn the CONTROL dial to select the desired item, then press the CONTROL dial.

  • Page 30: Selecting The Mode Setting Of Each Item

    Changing the mode settings While recording in mirror mode, you cannot operate the menu system. Note on changing the mode settings Menu items differ depending on the setting of the POWER switch to VTR or CAMERA/ PHOTO. Selecting the mode setting of each item Items for both CAMERA/PHOTO and VTR modes...
  • Page 31 Changing the mode settings VF BRIGHT Close the LCD panel. Select this item to adjust the brightness of the viewfinder. The viewfinder becomes brighter when you turn the CONTROL dial up (+), and darker when you turn it down (–). VF PW-SAVE <ON/OFF>...
  • Page 32 Changing the mode settings DEMO MODE <STBY/OFF> •Select STBY to glance over the function of camcorder. •Select OFF not to display demonstration. Notes on DEMO MODE • DEMO MODE is set to STBY(Standby) at the factory and the demonstration starts about 10 minutes after you set the POWER switch to CAMERA without inserting a cassette.
  • Page 33 Changing the mode settings CM SEARCH <ON/OFF> •Select ON to search using cassette memory. •Select OFF to search without using cassette memory. DATA CODE <DATE/CAM or DATE> •Select DATE/CAM to display date and recording data during playback. •Select DATE to display date during playback. * These settings are retained even when the battery is removed, as long as the vanadium- lithium battery is charged.

  • Page 34: Fade-In And Fade-Out

    Fade-in and fade-out You can fade in or out to give your recording a professional appearance. When fading in, the picture gradually fades in from black while the sound increases. When fading out, the picture gradually fades to black while the sound decreases. When fading in [a] (1) While the camcorder is in Standby mode, press FADER until the desired indicator...
  • Page 35 Fade-in and fade-out To cancel the fade-in/fade-out function Before pressing START/STOP, press FADER until the fade indicator disappears. When the POWER switch is set to PHOTO, or the START/STOP MODE control is set to ANTI GROUND SHOOTING or 5SEC You cannot use the fade-in/fade-out function. Note on the fader function You cannot use the following function while using the fader function.

  • Page 36: Shooting With Backlighting

    Shooting with backlighting When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears on the LCD or in the viewfinder. [a] Subject is too dark because of backlight.

  • Page 37: Photo Recording

    Photo recording You can record a still picture like a photograph for about seven seconds. This mode is useful when you want to enjoy a picture such as a photograph or when you print a picture using a video printer (not supplied). You can record about 510 pictures on a 60-minute tape in SP mode.

  • Page 38: Printing The Still Picture

    Photo recording Note on the still picture When the still picture recorded on this camcorder is played back on another VCR, the picture may be blurred. This is not a malfunction. Note on the video flash light We recommend you to use the HVL-FDH video flash light (not supplied) when shooting in the dark.

  • Page 39: Enjoying Picture Effect

    Enjoying picture effect Selecting picture effect You can make pictures like those of television with the Picture Effect function. PASTEL [a] The picture is in pastel tones. NEG. ART [b] The color of the picture is reversed. SEPIA The picture is sepia. B&W The picture is monochrome (black and white).

  • Page 40: Using Picture Effect Function

    Enjoying picture effect Using picture effect function (1) While in Standby mode, press PICTURE EFFECT. (2) Turn the CONTROL dial to select the desired Picture Effect mode. Returning to normal mode Press PICTURE EFFECT repeatedly until the Picture Effect indicator disappears. Note on the picture effect When you turn the power off, the camcorder returns automatically to normal mode.

  • Page 41: Using The Wide Mode Function

    Using the wide mode function You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9WIDE). The picture with black bands at the top and the bottom on the LCD screen or in the viewfinder [a] is normal. The picture on a normal TV [b] is horizontally compressed.

  • Page 42: Using The Program Ae Function

    Using the PROGRAM AE function You can select from six PROGRAM AE (Auto Exposure) modes to suit your shooting situation. When you use PROGRAM AE, you can get a Portrait effect (the subject is in focus and the background is out of focus), capture high-speed action, record night views, etc.
  • Page 43 Using the PROGRAM AE function Notes on focus setting •In the Spotlight, Sports lesson and Beach & Ski modes, you cannot take close-ups because the camcorder is set to focus only on subjects in the middle to far distance. •In the Sunset & Moon and Landscape modes, the camcorder is set to focus only on distant subjects.

  • Page 44: Focusing Manually

    Focusing manually When to use manual focus In the following cases you should obtain better results by adjusting the focus manually. •Insufficient light [a] •Subjects with little contrast — walls, sky, etc. •Too much brightness behind the subject [c] •Horizontal stripes [d] •Subjects through frosted glass •Subjects beyond nets, etc.
  • Page 45 Focusing manually Focusing manually When focusing manually, first focus in telephoto before recording, and then reset the shot length. (1) Slide FOCUS down to MANUAL. The f indicator appears on the LCD secreen or in the viewfinder. (2) Turn the focus dial to focus on the subject. To focus in infinity Slide FOCUS to INFINITY.

  • Page 46: Adjusting The Exposure

    Adjusting the exposure When to adjust the exposure Adjust the exposure manually under the following cases. •The background is too bright (back lighting) •Insufficient light: most of the picture is dark •Bright subject and dark background •To record the darkness faithfully Ajuste de la exposición Cuándo ajustar la exposición...
  • Page 47 Adjusting the exposure Adjusting the exposure (1)Slide AUTO LOCK down. (2)Press EXPOSURE. The exposure indicator appears on the LCD screen or in the viewfinder. (3)Turn the CONTROL dial to adjust the exposure. The exposure is locked at the adjusted brightness. To return to automatic exposure mode Press EXPOSURE to turn off the exposure...

  • Page 48: Releasing The Steadyshot Function

    Releasing the STEADYSHOT function When you shoot, the indicator appears in the viewfinder. This indicates that the SteadyShot function is working and the camcorder compensates for camera-shake. You can release the SteadyShot function when you do not need to use the SteadyShot function. Do not use the SteadyShot function when shooting a stationary object with a tripod.
  • Page 49 Releasing the STEADYSHOT function To activate the SteadyShot function again Select ON in step 3, then press the CONTROL dial. Notes on the SteadyShot function •The SteadyShot function will not correct excessive camera-shake. •When you switch the SteadyShot function on or off, the exposure may fluctuate.

  • Page 50: Watching On A Tv Screen

    Watching on a TV screen Connect the camcorder to your VCR or TV to watch the playback picture on the TV screen. When monitoring the playback picture by connecting the camcorder to your TV, we recommend you to use house current for the power source.
  • Page 51 LASER LINK is a system which transmits and receives a picture and sound between video equipment having the mark by using infrared rays. LASER LINK is a trademark of Sony Corporation. To play back on a TV (1) Set the POWER switch on the camcorder to VTR.

  • Page 52: Searching The Boundaries Of Recorded Tape With Date

    Searching the boundaries of recorded tape with date You can search for the boundaries of recorded tape with date-Date Search function. To search the beginning of the specific date and play back from the point, there are two ways: •Using cassette memory, you can select the date displayed on the LCD screen or in the viewfinder.
  • Page 53 Searching the boundaries of recorded tape with date DATE SEARCH 1 JAN/ 1/97 2 JUL/ 2/97 3 OCT/ 4/97 11:00 AM DATE SEARCH 1 JAN/ 1/97 2 JUL/ 2/97 3 OCT/ 4/97 11:00 AM To stop searching Press p. Notes •The interval of the boundaries between the dates needs more than two minutes.

  • Page 54: Searching For The Date Without Using Cassette Memory

    Searching the boundaries of recorded tape with date Searching for the date without using cassette memory You can use this function whether the tape has cassette memory or not. (1) Set the POWER switch to VTR. (2) Press MENU to display the menu on the LCD screen.
  • Page 55 Searching the boundaries of recorded tape with date JUL.4.1997 DATE SEARCH To stop searching Press p. Búsqueda de los límites de la cinta grabada mediante fecha JUL.5.1997 Para detener la búsqueda Pulse p. DEC.31.1997 MENU CM SEARCH ON...

  • Page 56: Searching The Boundaries Of Recorded Tape With Title

    Searching the boundaries of recorded tape with title You can search for the boundaries of recorded tape with title-Title Search function. If you use a tape with cassette memory, you can select the title displayed on the LCD screen or in the viewfinder.
  • Page 57 Searching the boundaries of recorded tape with title TITLE SEARCH 1 HAPPY BIRTHDAY 2 WEDDING 3 HELLO! TITLE SEARCH 1 HAPPY BIRTHDAY 2 WEDDING 3 HELLO! To stop searching Press p. Notes •You cannot superimpose or search a title, if you use a cassette tape without cassette memory.

  • Page 58: Searching For A Photo- Photo Search/Photo Scan

    Searching for a photo- photo search/photo scan You can search for the recorded still picture - Photo Search function. There are two modes in Photo Search: •Using cassette memory, you can select the recorded date which is displayed on the LCD screen or in the viewfinder.
  • Page 59 Searching for a photo – photo search/photo scan PHOTO SEARCH 1 JAN/ 1/97 2 JUL/ 2/97 3 OCT/ 4/97 11:00 AM PHOTO SEARCH 1 JAN/ 1/97 2 JUL/ 2/97 3 OCT/ 4/97 11:00 AM To stop searching Press p. Note When you play back a tape which has a blank portion between recorded portions, the Photo Search function will not work correctly .

  • Page 60: Searching For A Photo Without Using Cassette Memory

    Searching for a photo – photo search/photo scan Searching for a photo without using cassette memory You can use this function whether the tape has cassette memory or not. (1) Set the POWER switch to VTR. (2) Press MENU to display the menu on the LCD screen.

  • Page 61: Scanning Photo

    Searching for a photo – photo search/photo scan Scanning photo You can use this function whether the tape has cassette memory or not. (1) Set the POWER switch to VTR. (2) Press SEARCH MODE on the Remote Commander repeatedly until the photo scan indicator displayed on the LCD screen.

  • Page 62: Returning To A Pre-Registered Position

    Returning to a pre- registered position Using the Remote Commander, you can easily go back to the desired point on a tape after playback. (1) During playback, press ZERO SET MEMORY at the point you later want to locate. The counter shows “0:00:00”...

  • Page 63: Displaying Recording Data - Data Code Function

    Displaying recording data – data code function You can display recording data (date/time or various settings when recorded) on the LCD screen or in the viewfinder during playback (Data Code). The Data Code is also displayed on the TV. Press DATA CODE during playback. To select the items to be displayed Set DATA CODE in the menu system, and select the following items:...

  • Page 64: Editing Onto Another Tape

    Editing onto another tape You can create your own video program by editing with any other DV, mini DV, h 8 mm, H Hi8, j VHS, k S-VHS, K S-VHSC or l Betamax VCR that has audio/video inputs. You can edit with little deterioration of picture and sound quality when using the DV connecting cable.
  • Page 65 Editing onto another tape Notes on editing when using the DV connecting cable • You can connect one VCR only. • You can record picture, sound and system data at the same time on the DV products by using the DV connecting cable only. •...

  • Page 66: Starting Editing

    Editing onto another tape Edición en otra cinta Notes on editing when using the A/V connecting cable •Press DATA CODE , SEARCH MODE, or DISPLAY to turn off the display indicators. Otherwise, the indicators will be recorded on the tape. •If your TV or VCR is a monaural type, connect the yellow plug of the A/V connecting cable for video to the TV or VCR.

  • Page 67: Replacing Recording On A Tape - Insert Editing

    Replacing recording on a tape – insert editing You can insert a new scene from a VCR onto your originally recorded tape by specifying starting and ending points. Connection is the same as in “Using the DV connecting cable” on page 64. In recording and recording pause mode, DV IN OUT jack automatically works as input jack.

  • Page 68: Audio Dubbing

    Audio dubbing You can record an audio sound to add to the original sound on a tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add a sound on your recorded tape by specifying starting and ending points.

  • Page 69: Adding An Audio Sound On A Recorded Tape

    Audio dubbing Adding an audio sound on a recorded tape (1) Insert your recorded tape into the camcorder. (2) While pressing the small green button on the POWER switch, set it to VTR. (3) On the camcorder, locate the point where the recording should begin by pressing 0 or ).

  • Page 70: Superimposing A Title

    Superimposing a title If you use a tape with cassette memory, you can superimpose the titles while recording or after recording. When you play back the tape, the title is displayed for 5 seconds from the point where you superimposed it. You can select from eight preset titles and one original (CUSTOM TITLE) to superimpose over the picture.
  • Page 71 Superimposing a title TITLE MODE HELLO HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATURATIONS! OUR SWEET BABY WEDDING VACATION TITLE : END Superposición de títulos TITLE MODE HELLO HAPPY BIRTHDAY HAPPY HOLIDAYS TITLE MODE HELLO HAPPY BIRTHDAY HAPPY HOLIDAYS TITLE MODE HELLO HAPPY BIRTHDAY HAPPY HOLIDAYS TITLE MODE HELLO...
  • Page 72 Superimposing a title Titles placed from the top of the screen as follows: HELLO ˜ HAPPY BIRTHDAY ˜ HAPPY HOLIDAYS ˜CONGRATULATIONS! ˜ OUR SWEET BABY ˜ WEDDING ˜ VACATION ˜ THE END˜ CUSTOM TITLE. When you have stored an original title The title appears above “CUSTOM TITLE”.

  • Page 73: Erasing A Title

    Superimposing a title Erasing a title (1) Press MENU to display the menu. (2) Turn the CONTROL dial to select TITLE ERASE, then press the CONTROL dial. (3) Turn the CONTROL dial to select the title you want to erase, then press the CONTROL dial. (4) Make sure the title is the one you want to erase, then press CONTROL dial again.

  • Page 74: Making A Custom Title

    Making a custom title If you use a tape with cassette memory, you can make one title of up to 20 characters and store it in memory. (1) Press TITLE to display the titles on the LCD screen or in the viewfinder. (2) Turn the CONTROL dial to select CUSTOM TITLE, then press the CONTROL dial.
  • Page 75 Making a custom title TITLE HELLO HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATURATIONS! OUR SWEET BABY WEDDING VACATION TITLE : END CUSTOM TITLE MUSIC––––––––––––––– AB CD E F GH I J 1 2 3 4 5 K L MNO 6 7 8 9 0 PQR S T UVWXY Z&...

  • Page 76: Labeling A Cassette

    Labeling a cassette If you use a tape with cassette memory, you can label a cassette. The label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and turn the power on, the label is displayed on the LCD screen, in the viewfinder, or on the TV screen.
  • Page 77 Labeling a cassette MENU TAPE TITLE MUSIC––––– AB CD E F GH I J 1 2 3 4 5 K L MNO 6 7 8 9 0 PQR S T UVWXY Z& MENU : END Etiquetado de videocassettes MENU COMMANDER TITLE ERASE TITLE D ––––––––––...

  • Page 78: Additional Information Usable Cassettes And Playback Modes

    Tapes with cassette memory have (Cassette Memory) mark. Sony recommends that you use a tape having mark to enjoy this camcorder fully. When you play back Copyright signal...
  • Page 79 Usable cassettes and playback modes Notes on the mini DV cassette To prevent accidental erasure Slide out the protect tab on the cassette so that the red portion is visible. [a] When affixing a label on the mini DV cassette Be sure to affix a label on only the location as illustrated below so as not to cause malfunction of the camcorder.

  • Page 80: Charging The Vanadium-Lithium Battery In The Camcorder

    Charging the vanadium- lithium battery in the camcorder Your camcorder is supplied with a vanadium- lithium battery installed so as to retain the date and time, etc., regardless of the setting of the POWER switch. The vanadium-lithium battery is always charged as long as you are using the camcorder.

  • Page 81: Resetting The Date And Time

    Resetting the date and time The date and time are set at the factory. Set the time according to the local time in your country. If you do not use the camcorder for about a year, the date and time settings may be released (bars may appear) because the vanadium-lithium battery installed in the camcorder will have been discharged.
  • Page 82 Resetting the date and time To correct the date and time setting Repeat steps 2 to 5. The year indicators changes as follows: 1997 1998 ... 2000 ... Note on the time indicator The internal clock of this camcorder operates on a 12-hour cycle.

  • Page 83: Tips For Using The Battery Pack

    Tips for using the battery pack This section shows you how you can get the most out of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned. Battery life is shorter in a cold environment Battery efficiency is decreased, and the battery...
  • Page 84 Tips for using the battery pack When to replace the battery pack While you are using your camcorder, the remaining battery indicator on the LCD screen or in the viewfinder decreases gradually as battery power is used up [a]. The remaining time in minutes also appears. When the remaining battery indicator reaches the lowest point, the i indicator appears and starts flashing on the LCD screen or in the viewfinder.
  • Page 85 Tips for using the battery pack The switch on the battery pack This switch is provided so that you can identify a charged battery pack. Set the switch to the “green mark” position when charging is completed. [a] (When the battery pack is removed from the AC power adaptor after charging, the switch automatically moves to the “green mark”...
  • Page 86 El “InfoLITHIUM” es un paquete de batería de litio que puede intercambiar datos con equipos de vídeo compatibles sobre su consumo de energía. Sony recomienda emplear el paquete de batería “InfoLITHIUM” con equipos de vídeo que presenten la marca mark.
  • Page 87 Tips for using the battery pack To obtain more accurate remaining battery indication Set the camcorder to recording standby mode and point towards a stationary object. Do not move the camcorder for 30 seconds or more. • If the indication seems incorrect, use up the battery and then recharge it fully (Full charge Note that if you have used the battery in a hot or cold environment for long time, or you have...
  • Page 88 Tips for using the battery pack Notes on charging A brand-new battery pack A brand-new battery pack is not charged. Before using the battery pack, charge it completely. Recharge the battery pack whenever you like You do not have to discharge it before recharging.

  • Page 89: Maintenance Information And Precautions

    Maintenance information and precautions Moisture condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the camcorder may not operate correctly.
  • Page 90 LCD o en el visor electrónico Si se produce [a] o [b], limpie los cabezales de vídeo con el cassette de limpieza Sony DVM12CL (no suministrado). Compruebe la imagen y si el problema anteriormente expuesto no se soluciona, repita la limpieza.
  • Page 91 8.4 V (AC power adaptor). •Should any solid object or liquid get inside the casing, unplug the camcorder and have it checked by Sony dealer before operating it any further. •Avoid rough handling or mechanical shock. Be particularly careful of the lens.
  • Page 92 Maintenance information and precautions AC power adaptor Charging •Use only an InfoLITHIUM type battery pack. •Place the battery pack on a flat surface without vibration during charging. •The battery pack will get hot during charging. This is normal. Others •Unplug the unit from the wall outlet when not in use for a long time.
  • Page 93 •Si toca el líquido, lávese con agua. •Si el líquido se introduce en los ojos, láveselos con abundante agua y consulte con un médico. Si surge alguna dificultad, desenchufe la unidad y póngase en contacto con el proveedor Sony más próximo.

  • Page 94: Using Your Camcorder Abroad

    Using your camcorder abroad Each country or area has its own electric and TV color systems. Before using your camcorder abroad, check the following points. Power sources You can use your camcorder in any country or area with the supplied AC-V316 AC power adaptor within 110 V to 240 V AC, 50/60 Hz.

  • Page 95: Trouble Check

    English Trouble check If you run into any problem using the camcorder, use the following table to troubleshoot the problem. Should the difficulty persist, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. Camcorder...
  • Page 96 Trouble check Operation Symptom The tape does not move when a tape transport button is pressed. No sound or only a low sound is heard when playing back a tape. The new sound added to the recorded tape is not heard. The SteadyShot function does not activate.
  • Page 97 The camcorder is not malfunctioning. m Change locations. • The video heads may be dirty. m Clean the heads using the Sony DVM12CL (not supplied) cleaning cassette. (p. 90) • The video heads may be dirty. m Clean the heads using the Sony DVM12CL (not supplied) cleaning cassette.
  • Page 98 Trouble check Others Symptom While editing using the DV connecting cable, recording picture cannot be monitored. The camcorder becomes warm. The supplied Remote Commander does not work. No function works though the power is The numbers or letters of 5 characters is displayed as a counter.
  • Page 99 The problem is with the AC power adaptor. Please contact your nearest Sony dealer in connection with the product with the problem. * If you use a battery pack which you have just bought or which has been left unused for a long time, the CHARGE lamp may flash at the first charging.

  • Page 100: Self-Diagnosis Function

    LCD screen. In this case, check the following table. First three digits If a difficulty persists after checking the problem a few times, contact your Sony dealer or local authorized Sony service facility. Cause and/or Corrective Action •...

  • Page 101: Solución De Problemas

    Si le surge algún problema mientras utiliza la videocámara, emplee la siguiente tabla para solucionarlo. Si el problema no se soluciona, desconecte la fuente de alimentación y póngase en contacto con un proveedor Sony o un centro de servicio técnico local autorizado. Videocámara Alimentación...
  • Page 102 Solución de problemas Funcionamiento Problema La cinta no se mueve al pulsar un botón de transporte de cinta. No se escucha el sonido o éste es muy bajo al reproducir una cinta. El sonido añadido a la cinta grabada no se escucha.
  • Page 103 La videocámara funciona correctamente. m Cambie de sitio. • Es posible que los cabezales de vídeo estén sucios. m Límpielos con el cassette de limpieza Sony DVM12CL (no suministrado). (p. 90) • Es posible que los cabezales de vídeo estén sucios.
  • Page 104 Solución de problemas Otros Problema Mientras edita utilizando el cable de conexión de DV, no es posible controlar la imagen de grabación. La videocámara se calienta. El mando a distancia suministrado no funciona. No se activa ninguna función aunque la alimentación está...
  • Page 105 CA. Póngase en contacto con el proveedor Sony más próximo en relación con el producto que causa el problema. * Si utiliza un paquete de batería recién adquirido o que no ha utilizado durante mucho tiempo, es posible que el indicador CHARGE parpadee al realizar la primera carga.
  • Page 106 • Se ha activado la función de autodiagnóstico para evitar fallos de funcionamiento de la videocámara. m Al ponerse en contacto con el proveedor Sony o con el centro de servicio técnico local autorizado, proporcione el número de servicio de cinco dígitos. (ejemplo: E:61:10)

  • Page 107: Specifications

    DC OUT: 8.4 V, 1.8 A in operating mode Battery charge terminal: 8.4 V, 1.4 A in charge mode Application Sony battery pack NP-F530, NP- F730, NP-F930 lithium ion type Operating temperature 32°F to 104°F (0°C to 40°C) Storage temperature –4°F to 140°F (–20°C to 60°C)

  • Page 108: Especificaciones

    Terminal de carga del paquete de batería: 8,4 V, 1,4 A en modo de carga Aplicación Paquete de batería Sony NP-F530, NP-F730, NP-F930 tipo ion de litio Temperatura de funcionamiento 0°C a 40°C (32°F a 104°F) Temperatura de almacenamiento –20°C a 60°C (–4°F a 140°F)

  • Page 109: Identifying The Parts

    Identifying the parts 1 PUSH/OPEN button (p. 17) 2 AUTO LOCK switch (p. 43, 47) 3 EXPOSURE button (p. 47) 4 PROGRAM AE button (p. 43) 5 PICTURE EFFECT button (p. 40) 6 CONTROL dial (p. 29) 7 Hook for shoulder strap (p. 115) 8 START/STOP button (p.
  • Page 110 Identifying the parts !™ !£ !¢ !∞ !§ !¶ !™ Tape transport buttons (p. 23) p STOP (stop) 0 REW (rewind) ( PLAY (playback) ) FF (fastforward) P PAUSE (pause) r REC (record) AUDIO DUB !£ Intelligent Accesory shoe !¢ Recording lamp !∞...
  • Page 111 Identifying the parts @¶ @• @ª #º #¡ #™ #£ @¶ DISPLAY button (p. 24) @• Speaker @ª LCD BRIGHT button (p. 17, 23) #º LCD Screen (p. 17, 23) #¡ VOLUME button (p. 23) #™ RESET button (p. 98) #£...
  • Page 112 Identifying the parts #ª $º #ª OPEN/EJECT lever (p. 11) $º Tripod receptacle (p. 21) Make sure that the length of the tripod screw is less than 9/32 inch (6.5mm). Otherwise, you cannot attach the tripod securely and the screw may damage the camcorder. $¡...

  • Page 113: Remote Commander

    Identifying the parts Remote Commander The buttons that have the same name on the Remote Commander as on the camcorder function identically. 1 PHOTO button (p. 37) 2 DISPLAY button (p. 24) 3 SEARCH MODE button (p. 52, 56, 58) 4 =/+ buttons (p.
  • Page 114 Identifying the Parts To prepare the Remote Commander To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA (R6) batteries. (1) Remove the battery cover from the Remote Commander. (2) Insert both of the size AA (R6) batteries with correct polarity.

  • Page 115: Attaching The Shoulder Strap

    VTR 2. The commander modes (1,2 and 3) are used to distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR in commander mode VTR 2, we recommend you change the commander mode or cover the remote sensor of the VCR with black paper.
  • Page 116 Identifying the Parts Operation indicators !º !¡ 1 Warning indicator (p. 118) 2 Zoom indicator (p. 15) 3 Manual focus/Infinity indicator (p. 45) 4 PROGRAM AE indicator (p. 43) 5 SteadyShot indicator (p. 48) 6 BACK LIGHT indicator (p. 36) 7 FADER indicator (p.
  • Page 117 Identifying the parts !∞ Recording standby mode indicator (p. 13)/ Tape transport mode indicator !§ Time code indicator (p. 14) / Self diagnosis function (p. 100) !¶ Remaining tape indicator (p. 14) !• ZERO SET MEMORY indicator(p. 62)/Photo capture indicator (p. 37) !ª...

  • Page 118: Warning Indicators

    Warning indicators If indicators flash on the LCD screen or in the viewfinder or warning messages appear on the display window , check the following: : you can hear the beep sound when BEEP is set to ON in the menu system. !º...
  • Page 119 Cárguela (p.81). 9 Se ha producido algún problema. Desconecte la fuente de alimentación y póngase en contacto con un proveedor Sony o un centro de servicio técnico local autorizado. 0 El paquete de batería no es del tipo “Info LITHIUM”.
  • Page 120 Copia de audio ... 68 COPY INHIBIT ... 78 D, E Demostración ... 117 DISPLAY ... 24 DV OUT ... 64 Sony Corporation Printed in Japan F, G, H Fade-in/fade-out ... 34 FADER ... 34 FOCUS ... 44 Full charge ... 7 I, J, K, L InfoLITHIUM ...

This manual is also suitable for:

Handycam vision dcr-trv7

Table of Contents