Audio Mode - Sony Handycam DCR-TRV60 Operating Instructions Manual

Usable cassettes

Audio mode

12-bit mode: The original sound can be recorded in stereo 1, and the new sound in
16-bit mode: A new sound cannot be recorded but the original sound can be recorded in
When you play back a dual sound track tape
When you play back a dual sound track tape recorded in a stereo system, set HiFi
SOUND in
Sound from speaker
HiFi Sound Mode
STEREO
1
2
You cannot record dual sound programs on your camcorder.
Notes on the cassette
To prevent accidental erasure
Slide the write-protect tab on the cassette to SAVE >.
When affixing a label on the cassette
Be sure to affix a label only on the locations as illustrated below [a] so as not to cause
malfunction of your camcorder.
After using the cassette
Rewind the tape to the beginning, put the cassette in its case, and store it in an upright
position.
stereo 2 in 32 kHz. The balance between stereo 1 and stereo 2 can be
adjusted by selecting AUDIO MIX in the menu settings during playback.
Both sounds can be played back.
high quality. Moreover, your camcorder can also play back sound recorded
in 32 kHz, 44.1 kHz or 48 kHz. When playing back the tape recorded in the
16-bit mode, the 16BIT indicator appears on the screen.
to a desired mode in the menu settings (p. 175).
Playing back the stereo tape
Stereo
Playing back the dual
sound track tape
Main sound and sub sound
Lch Main sound
Rch Sub sound
Do not affix a label along this
border.
[a]
195