Recording a picture from a tape as a moving picture
Recording a moving picture from other equipment
You can use either the A/V connecting cable or i.LINK cable.
Connect the equipment as illustrated on page 89.
When connecting with the A/V connecting cable, set DISPLAY in
menu settings. (The default setting is LCD.)
The POWER switch should be set to
(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired
(2) Press START/STOP at the scene where you want to start recording from.
Note
Recording may abort unexpectedly or distorted images may be recorded in the
following cases:
– When there is a blank portion on the tape.
– When recording from the tape repeatedly used for dubbing and the recording state is
poor.
– When the input signal is cut off.
126
program.
The image from the other equipment is displayed on the LCD screen or in the
viewfinder.
.
to LCD in the