Capturing images from an analog video
unit on a computer
– Signal convert function
You can capture images and sound from an analog video unit connected to a computer
which has the DV port via your camcorder.
Before operation
Set DISPLAY in
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select A/V t DV OUT in
(4) Select ON, then press EXEC.
(5) Start playback on the analog video unit.
(6) Start capturing procedures on the computer.
The operation procedures depend on the computer and the software you are
using.
For details of how to capture images, refer to the operating instructions of the
computer and software.
OUT
S VIDEO
VIDEO
AUDIO
VCR
: Signal flow
After capturing images and sound
Stop capturing procedures on the computer, and stop playback on the analog video
unit.
to LCD in the menu settings. (The default setting is LCD.)
Yellow
A/V connecting cable (supplied)
Red
White
.
, then press EXEC.
AUDIO/
VIDEO
DV
Interface
i.LINK cable (optional)
i.LINK
169