Using The Viewfinder - Sony Handycam DCR-TRV60 Operating Instructions Manual

Using the viewfinder

Turn the LCD panel over and move it back to your camcorder body with the LCD
screen facing out. You can operate with the touch panel using the viewfinder.
Use the viewfinder when operating camera brightness and fader on the touch panel.
The POWER switch should be set to
Operate by touching the panel.
(1) Turn the LCD panel over and move it back to your camcorder body with the
LCD screen facing out.
(2) Press
(3) Press OK. The LCD screen is turned off.
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
FADER (only when the POWER switch is set to CAMERA) appear.
(5) Press the LCD screen and select a desired item, then press
EXPOSURE: Adjust the exposure by pressing –/+.
FADER:
ON:
4
When the POWER
switch is set to CAMERA
EXPO–
When the POWER
switch is set to MEMORY
EXPO–
To make the buttons on the LCD screen disappear
Press OK.
OFF. The PANEL OFF indicator appears on the screen.
Press FADER repeatedly until a desired fader mode appears.
The indicator changes as follows:
FADER t M. FADER t BOUNCE t MONOTONE
(no indicator) T DOT
The LCD screen lights up.
OK
SURE
ON FADER
OK
SURE
ON
or .
T WIPE T OVERLAP
Viewfinder
OK, ON and
OK.
69