Sony Handycam DCR-TRV60 Operating Instructions Manual page 113

Recording still images on a "Memory Stick"
– Memory Photo recording
Recording images with the flash
The POWER switch should be set to
If you press PHOTO, the flash automatically pops up to strobe. The default setting is
auto (no indicator). To change the flash mode, press
mode indicator appears on the screen. You cannot use this function while recording
moving pictures.
Each press of
t
When you set RED EYE R in
follows:
t
Forced flash:
Auto red-eye reduction:
Forced red-eye reduction: The flash fires before recording to reduce the red-eye
No flash:
The flash is automatically adjusted to the appropriate brightness. You can also change
FLASH LVL in
images to find the most appropriate setting for FLASH LVL.
(flash) changes the indicator as follows:
t AUTO (No indicator)
to ON in the menu settings, the indicator changes as
t
The flash fires regardless of the surrounding
brightness.
The flash fires before recording to reduce the red-eye.
regardless of the surrounding brightness.
The flash does not fire.
to the desired brightness in the menu settings. Try recording various
or .
(flash) repeatedly until the flash
(flash)
113