Sony Handycam DCR-TRV60 Operating Instructions Manual page 151

Connecting your camcorder to a computer using the USB cable
(For Windows users)
Making the computer recognize your camcorder
If you are using Windows 2000, log in with permission of administrators.
If you are using Windows XP, log in with permission of computer administrators.
Viewing picture recorded on the tape
(1) Connect the AC Adaptor, then set the POWER switch to VCR.
(2) Press FN to display PAGE1.
(3) Press MENU.
(4) Select USB STREAM in
(5) Select ON, then press EXEC.
(6) Connect the
using the supplied USB cable.
The computer recognizes your camcorder, and the Windows Add Hardware
Wizard starts.
(7) Follow the on-screen messages so that the Add Hardware Wizard recognizes
that the USB drivers have been installed. Be sure to allow the installation to
complete without interrupting it.
For Windows 2000, Windows XP users
When the dialogue box prompting you to confirm the digital signature appears, select
"Yes" if you use Windows 2000 or select "Continue Anyway" if you use Windows XP.
, then press EXEC.
(USB) jack on your camcorder to the USB port on the computer
(USB) jack
USB cable (supplied)
USB port
151