— Advanced Recording Operations —
Recording still images on a "Memory Stick"
during tape recording standby or tape recording
Insert a "Memory Stick" into your camcorder beforehand.
During tape recording standby
The POWER switch should be set to
(1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE
(2) Press PHOTO deeply.
During tape recording
The POWER switch should be set to
Press PHOTO deeply.
The image displayed on the screen when you press PHOTO deeply is recorded on the
"Memory Stick."
Recording on the "Memory Stick" is complete when the bar scroll indicator disappears.
46
indicator appears. Recording does not start yet. To change the still image,
release PHOTO, select a still image again, and then press and hold PHOTO
lightly.
Recording is complete when the bar scroll indicator disappears.
The image displayed on the screen when you press PHOTO deeply is recorded
in the currently displayed folder (p. 129) in the "Memory Stick."
.
1
PHOTO
2
PHOTO
.
FINE
12
640
CAPTURE
1 0 1
FINE
640
1 0 1