Selecting the quality and size of image
data
Selecting the still image quality
The default setting is FINE.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select STILL SET in
(4) Select QUALITY, then press EXEC.
(5) Select a desired image quality, then press EXEC.
3
Setting
FINE (FINE)
STANDARD (STD) This is the standard image quality. Standard images are
To return to FN
Press EXIT.
, then press EXEC.
MEM SET 1
EXIT
STILL SET
BURST
OFF
QUALITY
IMAGESIZE
EXEC
RET.
Meaning
Use this mode when you want to record high quality
images. Fine images are compressed to about 1/4.
compressed to about 1/10.
or
.
4
MEM SET 1
EXIT
STILL SET
BURST
QUALITY
FINE
IMAGESIZE
STANDARD
REMAIN
EXEC
RET.
8
105