Warning Messages - Sony Handycam DCR-TRV60 Operating Instructions Manual

Warning messages

If messages appear on the screen, check the following. See the page in parentheses
"( )" for details.
• CLOCK SET
• FOR "InfoLITHIUM"
BATTERY ONLY
• CLEANING CASSETTE
• COPY INHIBIT
• FULL
• 16BIT
• REC MODE
• TAPE
• "i.LINK" CABLE
• FULL
• -
• NO FILE
• NO MEMORY STICK
• AUDIO ERROR
• MEMORY STICK ERROR
• FORMAT ERROR
• PLAY ERROR
• REC ERROR
• INCOMPATIBLE
MEMORY STICK
• READ-ONLY MEMORY STICK A read-only "Memory Stick" is inserted. *
• Q Z TAPE END
• Q NO TAPE
• DELETING
• FORMATTING
• FOLDER NO.FULL
• USB STREAMING ON GOING Your camcorder is performing the USB Streaming function.
• NOW CHARGING
* You hear the melody or beep sound.
DCR-TRV70 only
Refer to the Network Function/Application Operating Instructions supplied with your camcorder
about warning messages in the network function.
Set the date and time (p. 20).
Use an "InfoLITHIUM" battery pack (p. 197).
The video heads are dirty (p. 203).
The x indicator and "
appear one after another on the screen.
You tried to record a picture that has a copyright control signal
(p. 194). *
The Cassette Memory is full. *
AUDIO MODE is set to 16BIT. You cannot dub new sound
(p. 179). *
REC MODE is set to LP. * You cannot dub new sound (p. 179).
You cannot dub new sound on the tape recorded in a TV color
system other than that of your camcorder.
There is no recorded portion on the tape. * You cannot dub new
sound.
The i.LINK cable is connected. You cannot dub new sound
(p. 93). *
The "Memory Stick" is full (p. 112). *
The write-protect tab on the "Memory Stick" is set to LOCK
(p. 102). *
No image is recorded or there is no recognizable file on the
"Memory Stick". *
No "Memory Stick" is inserted. *
You are trying to record an image with sound that cannot be
recorded by your camcorder on the "Memory Stick" (p. 125). *
The "Memory Stick" data is corrupted (p. 104). *
The "Memory Stick" is not recognized (p. 177). *
Check the format.
The image is distorted and cannot be played back. * Reinsert the
"Memory Stick."
Turn the POWER switch on again. *
The "Memory Stick" inserted is not compatible
with your camcorder. *
The tape has reached the end of the tape. *
Insert a cassette. *
You press PHOTO on your camcorder while deleting data in
the "Memory Stick." *
You press PHOTO on your camcorder while formatting the
"Memory Stick." *
You have reached the maximum of folders that can be created.
Charging the built-in flash or an external flash (optional) does
not work correctly. *
CLEANING CASSETTE" message
193