During Playback - Sony Handycam DCR-TRV60 Operating Instructions Manual

Types of trouble and how to correct trouble

During playback

Symptom
The playback button does not work.
There are horizontal lines on the
picture or the playback picture is not
clear or does not appear.
No sound or only a low sound is
heard when playing back the tape.
The sound breaks off.
Displaying the record date, Date
search does not work.
Title search does not work.
New sound added to the recorded
tape is not heard.
The title is not displayed.
Noises appear and "PAL" is
displayed on the screen.
Cause and/or Corrective Actions
• The cassette has run out of the tape.
c Rewind the tape (p. 39).
• The video head may be dirty.
c Clean the head using the cleaning cassette (optional)
(p. 203).
• The stereo tape is played back with HiFi SOUND in
set to 2 in the menu settings.
c Set HiFi SOUND to STEREO (p. 175).
• Volume is turned to minimum.
c Turn up the volume (p. 39).
• AUDIO MIX in
settings.
c Adjust AUDIO MIX (p. 175).
• The video head may be dirty.
c Clean the head using the cleaning cassette (optional)
(p. 203).
• The cassette has no Cassette Memory.
c Use a cassette with Cassette Memory (p. 76).
• CM SEARCH in
c Set it to ON (p. 178).
• The tape has a blank portion between recorded portions
(p. 77).
• The cassette has no Cassette Memory.
c Use a cassette with Cassette Memory (p. 75).
• CM SEARCH in
c Set it to ON (p. 178).
• There is no title in the tape.
c Superimpose the titles (p. 97).
• The tape has a blank portion between recorded portions
(p. 75).
• AUDIO MIX in
settings.
c Adjust AUDIO MIX (p. 175).
• TITLE DSPL in
c Set it to ON (p. 178).
• The tape was recorded in a TV color system other than
that of your camcorder.
is set to the ST2 side in the menu
is set to OFF in the menu settings.
is set to OFF in the menu settings.
is set to the ST1 side in the menu
is set to OFF in the menu settings.
(continued on the following page)
185