Selecting the quality and size of image data
Selecting the still image size
You can select image size 1600 × 1200 or 640 × 480. (When the POWER switch is set to
CAMERA or VCR, the image size is automatically set to 640 × 480.)
The default setting is 1600 × 1200.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select STILL SET in
(4) Select IMAGESIZE, then press EXEC.
(5) Select a desired image size, then press EXEC.
Memory capacity of still images
Recorded images are compressed in the JPEG format before being stored in memory.
The memory capacity allotted to each still image varies depending on the selected
image quality and image size. Details are shown in the table below.
1600 × 1200 image size
Image quality
FINE
STANDARD
640 × 480 image size
Image quality
FINE
STANDARD
106
The indicator changes as follow:
1600
3
MEM SET 1
STILL SET
BURST
QUALITY
IMAGESIZE
r
R
, then press EXEC.
640
4
MEM SET 1
EXIT
OFF
EXEC
RET.
Memory capacity
About 960 KB
About 420 KB
Memory capacity
About 150 KB
About 60 KB
.
EXIT
1600
STILL SET
BURST
QUALITY
1600 × 1200
IMAGESIZE
640 × 480
REMA I N
8
r
R
EXEC
RET.