Checking Recordings - End Search/Edit Search/Rec Review - Sony Handycam DCR-TRV60 Operating Instructions Manual

Checking recordings
– End search/Edit search/Rec Review
You can use these buttons to check the recorded picture or shoot so that the transition
between the last recorded scene and the next scene you record is smooth.
End search
You can go to the end of the recorded section after you record.
(1) Set the POWER switch to CAMERA.
(2) Press FN to display PAGE1.
(3) Press END SCH.
The last five seconds of the recorded section is played back and your
camcorder returns to standby.
To return to FN
Press EXIT.
To cancel end search
Press END SCH again.
End search
When you use a cassette without Cassette Memory, End search does not work once you
eject the cassette after you have recorded on the tape. If you use a cassette with Cassette
Memory, End search works even once you eject the cassette.
If the tape has a blank portion between recorded portions
End search may not work correctly.
FN
EDITSEARCH
37