Indicators Displayed During Recording - Sony Handycam DCR-TRV60 Operating Instructions Manual

Recording a picture

Indicators displayed during recording

Indicators are not recorded on the tape.
50
min
JUL 4 2003
Remaining battery time indicator during recording
The remaining battery time indicator roughly indicates the continuous recording time.
The indicator may not be correct, depending on the conditions in which you are
recording. When you close the LCD panel and open it again, it takes about one minute
for the correct remaining battery time in minutes to be displayed.
Time code
The time code indicates the recording or playback time, "0:00:00" (hours : minutes :
seconds) in CAMERA and "0:00:00:00" (hours : minutes : seconds : frames) in VCR.
You cannot rewrite only the time code.
Recording data
The recording data (date/time or various settings when recorded) is not displayed
during recording. However, it is recorded automatically on the tape. To display the
recording data, press DATA CODE during playback. You can also use the Remote
Commander for this operation (p. 40).
Remaining battery time
Cassette Memory
This appears when using a cassette with Cassette Memory.
Recording mode
STBY/REC
REC 0:00:01 Time code/Tape counter
45min
Remaining tape
This appears after you insert a cassette.
12:05:56PM
FN button
FN
Press this button to display operation buttons on the
LCD screen.
Time
The time is displayed about five seconds after the
power is turned on.
Date
The date is displayed about five seconds after the
power is turned on.
27