Capturing Images From An Analog Video Unit On A Computer - Signal Convert Function (Dcr-Trv22/Trv33 Only) - Sony DCR-TRV19 Operating Instructions Manual

Capturing images from an analog video
unit on a computer – Signal convert
function (DCR-TRV22/TRV33 only)
You can capture images and sound from an analog video unit connected to a computer
which has the DV port via your camcorder.
Before operation
Set DISPLAY in
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select A/V t DV OUT in
(4) Select ON, then press EXEC.
(5) Start playback on the analog video unit.
(6) Start capturing procedures on the computer.
The operation procedures depend on the computer and the software which
you use.
For details of how to capture images, refer to the operating instructions of the
computer and software.
VCR
OUT
Yellow
S VIDEO
VIDEO
AUDIO
Red
White
: Signal flow
to LCD in the menu settings. (The default setting is LCD.)
, then press EXEC (p. 178).
A/V connecting cable
(supplied)
DV
Interface
.
AUDIO/
VIDEO
i.LINK cable
(optional)
Computer
i.LINK
173