Interfaces And Operator Controls For Pro Device - Siemens SIMATIC IPC477D Operating Instructions Manual

1.3.1

Interfaces and operator controls for PRO device

The figure of the interfaces applies to the PRO device. The assignment of the interfaces is
shown inside the terminal compartment cover.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
4 x USB port
Slot for external CFast card
Display port
COM1 port
DVI-I port
2 x Ethernet port
Connection terminal
24 V DC power supply
On/off switch
PROFIBUS-DP/MPI interface
(optional)
Protective conductor connection
USB 3.0 high speed/high current
Behind the cover
DPP
Serial interface, 9-pin D-sub connector
DVI connector for CRT or LCD monitor
(VGA via DVI-VGA adapter) with DVI interface
RJ45 Ethernet connection 1 and 2 for 10/100/1000 Mbps
Connection terminal inserted in delivered condition
PROFIBUS DP/MPI interface RS 485, isolated,
9-pin D-sub socket (available for 19" and 22" devices)
Overview
1.3 Design of the PRO device
31