Por.ini File - TransAct Epic 3000 Programmer's Manual

Table of Contents

Advertisement

T480 Programmer's Guide
returns a fail to verify status.
Note: if the Verify.cfg file is not present, the verify command will return
VB and a 0 CRC.

POR.INI file

The POR.INI file is used to control how fonts are encoded, named, identified and linked,
as well as allowing how the font to be printed is controlled. In addition the POR.INI file
defines how each legacy font is defined and printed. It also controls several other
features and functions.
The POR.INI file is divided into sections:
[encoding]
This section defines how the printer encodes the character set. It may be ASCII
with code page, or Unicode.
selected and/or defined in this section.
[font]This section defines how the scalable fonts are named and generated. You
can control the font cache size and partitions, the Hinting, link fonts and font
abstractions.
[bmfont]
This section defines and abstracts any bitmap font definitions.
[Legacy]
This section defines how the previously defined fonts are used to generate
legacy fonts for each emulation.
The following is an example of the POR.INI file:
; Default System Configuration.PE9105-1.04
[encoding]
;To remap Unicode characters, define a UniRemap.cpm file.
UniMapfile = UniRemap.cpm
mode = ASCII
;NOTE: A code page is only used in ASCII mode.
;To specify a code page, use one of the following forms:
CodePage = 437
;CPFile = CP8959-1.cpm
;To remap Unicode characters, define a UniRemap.cpm file.
;UniMapfile = UniRemap.cpm
[font]
;Optionally specify the Cache Partitions
;Fontcache = 320,256,64
;True Type font hinting may be disabled by setting Nohint to 1
;Nohint = 0
;True Type font line spacing fit; 1-Min 2-Typ, 3-Max
;TTFit = 2
;Extra Character Bolding
;Bolding = 300,10
;Specify Linked fonts starting with LinkFont1.
;LinkFont1 will be searched first.
;You may specify up to 8 linked fonts.
;if Link Fonts are defined, they will be Font0.
LinkFont1 = TactMOD.ttf
LinkFont2 = TactWGL_M.ttf
LinkFont3 = TactWGL_V.ttf
100-14362
T480 Extended Printer Control
If ASCII is selected the default code page is
Rev A
Page 231

Advertisement

Table of Contents
loading

Table of Contents