Table of Contents
Advertisement
Programming Codes
GS1-Databar-Truncated
GS1-Databar truncated is a more compact version of the GS1-Databar and will encode
the full 14 digit EAN.UCC item identification but using less vertical height. The
specification defines the truncated version to be 13 times the X dimension, however, the
height of the barcodes can be set by the configuration commands. The GS1-Databar
truncated version printed by the EPIC 3000 is simply ½ the height of the standard GS-1
DataBar symbol.
Function
ASCII
Hexadecimal 1BH 62H <19> {information} [NUL]
Decimal
Figure 25 GS1-Databar 14 Truncated Example
Note: Note that the data to be encoded does not include the GS1 format [01]
as it is implied. You only need to send the 13 digit item number. The check
digit will be generated by the printer.
GS1-Databar-14 Stacked and GS1-Databar-14 Stacked-Omni
GS1-Databar-14 Stacked and GS1-Databar-14 Stacked Omni-directional are RSS-14
barcodes printed in a stacked format. The ratios between the top and bottom of this
symbol are fixed and are not adjustable. There is also a separator between the
barcodes that has a specific relationship to the top and bottom bars. This barcode must
be printed within a controlled aspect ratio. GS1-Databar Stacked symbols are typically
printed without HRI. To allow HRI to be printed if required the Stacked HRI may be
enabled with a special configuration command.
Function
ASCII
Hexadecimal 1BH 62H <21> {information} [NUL]
Decimal
[ESC] b <21> 1234567890123 [NUL]
Page 108
GS1-Databar 14 Truncated
[ESC] b <19> {information} [NUL]
<27> <98> <19> {information} [NUL]
[ESC] b <19> 1234567890123 [NUL]
GS1-Databar 14 Stacked
[ESC] b <21> {information} [NUL]
<27> <98> <21> {information} [NUL]
Figure 26 GS1-Databar 14 Stacked Example
Rev A
T480 Programmer's Guide
100-14362
Advertisement
Table of Contents
