TransAct Epic 3000 Programmer's Manual page 197

T480 Programmer's Guide
Description The &%UR <Name..>& command loads the referenced universal graphic
into the universal graphic buffer. The universal graphic buffer is then inserted into the
data stream. If the named item does not exist or is not a universal graphic, the EPIC
3000 ignores the command.
&%US <Name.. >&
IPCL &%US <Name.. >&
Description The &%US <Name.. >& command flags the referenced item to `be
processed at startup. Only one user character definition and one universal graphic may
be flagged to run at startup.
&%UD <Name..>&
IPCL &%UD <Name..>&
Description The &%UD <Name..>&command removes an item from user store and
frees up space. If the item does not exist, the EPIC 3000 ignores the command.
&%UFALL& Flush information from user store
IPCL &%UFALL&
Description The &%UFALL& command clears all entries in user store and frees the
data space. It must have the name, "ALL" (in uppercase) attached.
100-14362
Flag item as a start-up universal graphic
Delete item from user store
Rev A
T480 Unicode and Fonts
Page 197