Table of Contents
Advertisement
Epic 3000 Programmer's Guide
Programming Codes
Disclaimer
NOTICE TO ALL PERSONS RECEIVING THIS DOCUMENT:
The information in this document is subject to change without notice. No part of this
document may be reproduced, stored or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written permission of
TransAct Technologies, Inc. ("TransAct"). This document is the property of and contains
information that is both confidential and proprietary to TransAct. Recipient shall not
disclose any portion of this document to any third party.
TRANSACT DOES NOT ASSUME ANY LIABILITY FOR DAMAGES INCURRED,
DIRECTLY OR INDIRECTLY, FROM ANY ERRORS, OMISSIONS OR
DISCREPANCIES IN THE INFORMATION CONTAINED IN THIS DOCUMENT.
TransAct cannot guarantee that changes in software and equipment made by other
manufacturers, and referred to in this publication, do not affect the applicability of
information in this publication.
Copyright
© 2015 TransAct Technologies, Inc. All rights reserved.
Revision Level A
Dec 2015
Printed in USA
Trademarks
Some of the product names mentioned herein are used for identification purposes only
and may be trademarks and/or registered trademarks of their respective companies.
BANKjet, 50Plus, Insta-Load, Ithaca, "Made to Order. Built to Last", Magnetec, PcOS,
PRINT IT. STICK IT.
, POWEROLL,
RECEIPTS
POSjet, PowerPocket, iTherm", "
"
"
THAT REGISTER
", and TransAct are registered trademarks and Epic 950, Epicenteral,
Flex-Zone, imPort, ithaColor, KITCHENjet, Momentum, QDT and TicketBurst are
trademarks of TransAct Technologies, Inc.
QR Code is registered trademark of DENSO WAVE INCORPORATED in JAPAN and
other countries.
EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation in Japan
and other countries.
100-14362
Rev A
Page 5
Advertisement
Table of Contents
