Character Font - TransAct Epic 3000 Programmer's Manual

Epic 3000 Programmer's Guide

Character Font

[ESC] # Begin 12 x 12 draft print mode
ASCII [ESC] # <0>
Hexadecimal 1BH 23H 00H
Decimal <27> <35> <0>
IPCL &%QT
EPOS [ESC] ! <n>
Description The [ESC] # <0> command begins 12 x 12 draft print mode. Draft print is
provided to maintain compatibility with other Ithaca
[ESC] I Set print quality mode
ASCII [ESC] I <n>
Hexadecimal 1BH 49H <n>
Decimal <27> <73> <n>
IPCL &%QT 24 x 10 Small
&%QU 24 x 14 Medium
&%QL 24 x 18 Large
&%QS 24 x 20 Larger
EPOS [ESC] x <n> and/or [ESC] ! <n>
Description The [ESC] I <n> (e.g. capital "i") command begins draft, large draft or
near letter quality print mode.
Where n 0 = 24 x 10 Small
1 = 24 x 14 Medium
2 = 24 x 18 Large
3 = 24 x 20 Larger
4 - 7 repeats 0 - 3
Note 1: In EPOS mode, [ESC] x <n> is similar to [ESC] I <n>. [ESC] ! <n>
performs a similar function.
100-14362
®
products.
Rev A
Programming Codes
Page 49