Table of Contents
Advertisement
Epic 3000 Programmer's Guide
NAK <5> (15H 0BH)
Printer has not power cycled since the last [ENQ] <11>
Description The first time after a reset, the command returns [ACK] <11>, after that
the command returns [NAK] <11>. The command allows the application
to determine if the printer has been power cycled and needs to be
reinitialized. The [ENQ] <10> command and the INIT signal on the
parallel port both cause the printer to return power up status.
[ENQ] <14>
Inquire Mechanical error status
ASCII
[ENQ] <14>
Hexadecimal 05H 0EH
Decimal
<5> <14>
Function
Error status
Response
ACK <14> (06H 0EH)
NAK <14> (15H 0EH)
Note: For this status request to function, the "Buffer Full Only" off-line
option should be selected.
100-14362
No mechanical errors
Mechanical error has occurred
(Use [ENQ]<22> to identify the error)
Rev A
Programming Codes
Page 173
Advertisement
Table of Contents
