Table of Contents
Advertisement
T480 Unicode and Fonts
Function
Set minimum Line Spacing in ¼ Points
ASCII
[ESC] + v <d>
Hexadecimal 1BH 2BH 76H
Decimal
<27> <43> <118>
d = 0, 16 – 255
Range
The [ESC] + v command will set the line spacing in ¼ points, where ¼ point is defined as
th
1/288
of an inch.
ASCII
Hexadecimal
Decimal
Range
If d = 0 variable spacing is selected.
NOTE: This is the minimum spacing. If the character height setting
requires a larger spacing, the character height will override this setting.
Function
Set stroke font brush size.
ASCII
[ESC] + B <w>
Hexadecimal 1BH 2BH 42H
Decimal
<27> <43> <66>
w = 0, 6 – 200
Range
Description The [ESC] + B command will set brush stroke percentage for stroke fonts.
If the brush size is set to zero the font design stroke width will be used.
Values from 6 to 200 represent 0.4 to 12% of the em-width of the font. The default for
most fonts is about 3%. The EPIC 3000 using the GB18030 font supplied by TransAct
Technologies produces the best characters with a brush size of about 100.
Note: The default value for the Brush stroke may be set in the POR.INI
file.
Page 214
[ESC] + v <d>
1BH 2BH 76H
<27> <43> <118>
d = 0, 16 – 255
Rev A
T480 Programmer's Guide
100-14362
All
All
Advertisement
Table of Contents
