Changing The Bobbin - DURKOPP ADLER 911-210-3020-10 Operating Instructions Manual

9. Press the bobbin winder flap (4) against the bobbin.
 The winder starts and stops automatically when the configured

4.9 Changing the bobbin

Fig. 9: Changing the bobbin (1)
(1) - Sewing material holder
(2) - Button for threading mode
To change the bobbin:
1. Remove the sewing material holder (1) (for alternating clamps only).
2. Press the threading mode (2) button.
 The machine is in threading mode.
26
bobbin filling volume is reached.
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch the machine to threading mode before
changing the bobbin.
When threading mode is active, do not reach into
the hook area until this is lit up.
①
The button (2) lights up.
The sewing feet are lowered.
The hook cover (3) is opened and lit.
②
(3) - Hook cover
Operating Instructions 911-210-10 - 00.0 - 06/2020
Operation
③