Partial Reset - Weco WF-104 Instruction Manual

C . 006.0001.0940
od
16/04/2018 V.2.25
ENGLISH

5.1 PARTIAL RESET

The reset procedure involves restoration of the parameter values and settings, except the following
settings:
- Settings of the SETUP menu.
- saved JOBS.
Example of control panel (applies to model WF-108)
L2
L4 L1
ACTIVATION
A
S1
S7
Menu Menu
S5
S6
○ Set the welding power source ON/OFF switch to "O" to switch the unit off.
○ Set the welding power source ON/OFF switch to "I" to switch on the unit.
○ Simultaneously press the keys S1
A
out before the wording "PROGRAM UPDATE" appears in the following display: D4 ]
○ PARTIAL RESET SELECT TYPE OF RESET : The message will appear on display: D4
○ Exit without confirmation
- Set the welding power source ON/OFF switch to "O" to switch the unit off.
- Set the welding power source ON/OFF switch to "I" to switch on the unit.
○ Exit with confirmation
B
- Press S4
The display D4 will show the message: MEMORY CLEANING
- Wait for the memory clear procedure to terminate.
The unit restarts with the power-up procedure.
18
WELD THE WORLD
E1 D1 L6 L7
D4 E3
and S10
to save the setting and quit the menu.
L5
D2
HOLD
m/min
mm
S4 L10 L12 S3
L9 L11 S2
B
OUTPUT
[ This operation must be carried
WF-104
WF-108
L3
E2 L8
S T O P
ACTIVATION
S10
L13
S9
L14
L15
S8
A