Wire Spool Positioning - Weco WF-104 Instruction Manual

WF-104
WF-108

2.4 WIRE SPOOL POSITIONING

1. Open the unit side door to gain access to
the spool compartment.
2. Unscrew the cap of the spool holder.
3. If necessary, fit an adapter for the wire
spool.
4. Fit the spool in the spool holder, ensuring it
is located correctly.
5. Adjust the spool holder braking system by
tightening/loosening the screw in such a
way that the wire feed force is not exces-
sive and when the spool stops rotating no
excess wire is released.
6. Refit the plug.
WELD THE WORLD
Cod. 006.0001.0940
16/04/2018 V.2.25
ENGLISH
11