Gas Flow Adjustment - Weco WF-104 Instruction Manual

C . 006.0001.0940
od
16/04/2018 V.2.25
ENGLISH
Example of control panel (applies to model WF-108)
S1
SELECTION
C A
S7
OUTPUT
S5
B
S6
SETTING
○ Press and hold down the button S7
The SET UP menu will be accessed, with the machine on.
A
LOCK...WRITE PASSWORD : 0000 - The message will appear on display: D4
○ Enter the active 4 digit numerical password.
○ Use buttons S5
B
The selected digit will flash..
○ Use encoder E3
○ Exit without confirmation
- Press the S4
This action will automatically close the menu
C
○ Exit with confirmation
- Press the S7
The unit restarts with the power-up procedure.
Quit lock status.

6.3 GAS FLOW ADJUSTMENT

When the unit is powered on the solenoid valve opens for 1 second.
This serves to fill the gas circuit.
○ Open the gas solenoid valve by pressing and releasing button S9
○ Adjust the pressure of gas flowing from the torch by means of the flow meter connected to the
gas cylinder.
○ Close the gas solenoid valve by pressing and releasing the button S9
○ The solenoid valve closes automatically after 30 seconds.
26
L2
L4 L1 E1 D1
Menu Menu
D4
SETTING
and S6 to select the digit to be changed.
to set up the value.
button.
button.
WELD THE WORLD
L5
L6 L7
HOLD
m/min
mm
E3 S4 L10 L12
L9 L11
B C
OUTPUT
for 5 second.
L3
D2 E2 L8
S T O P
S3
S2
.
.
WF-104
WF-108
S10
L13
S9
L14
L15
S8