Exporting A Job - Weco WF-104 Instruction Manual

C . 006.0001.0940
od
16/04/2018 V.2.25
ENGLISH

11.6 EXPORTING A JOB

Example of control panel (applies to model WF-108)
L2
L4 L1
S1
S7 Menu Menu
B
S5
S6
SELECTION
○ Insert the memory stick in the USB port.
A
○ Hold down button S8
The job menu appears in display: D4.
○ Press buttons S5
B
The selected parameter is shown by symbol "
○ Use the encoder E3
C
When there are no saved jobs the following message appears on the bottom line: NO JOB
Exit without confirmation
○ Press the S4
This action will automatically close the menu
D
Exit with confirmation
○ Press the S8 button.
Tab. 13 - JOB exporting operation messages
MESSAGE
USB DEVICE NOT FOUND
EXPORT FAILED
62
WELD THE WORLD
E1 D1 L6 L7
D4 E3
C
SELECTION
to activate the job menu.
and S6 to select parameter OPT.
, to select the USB EXPORT function.
button.
MEANING
USB device not found
- memory stick removed before
completing the operation.
L5
D2
HOLD
m/min
mm
S4 L10 L12 S3
L9 L11 S2
D
OUTPUT

".
CHECKS
- incorrectly inserted memory stick
- memory stick removed before completing the ope-
ration.
- USB not formatted as FAT32.
- unidentifiable generic error: re-insert the memory
stick and retry.
- the connected USB drive is damaged.
WF-104
WF-108
L3
E2 L8
S T O P
S10
L13
S9
L14
L15
S8
ACTIVATION
A