Pulsed Synergic Mig/Mag Parameters Setting (1St Level): Synergic Curve Setting; Pulsed Synergic Mig/Mag Parameters Setting (2Nd Level) - Weco WF-104 Instruction Manual

C . 006.0001.0940
od
16/04/2018 V.2.25
ENGLISH

10.4.1 Pulsed Synergic MIG/MAG parameters setting (1st level): synergic curve setting.

B
○ Scroll down the list of parameters to be edited by pressing buttons S5
○ Using the encoder E3
C
The value is saved automatically.

10.4.2 Pulsed Synergic MIG/MAG parameters setting (2nd level).

D
○ Press the button S7
B
○ Scroll down the list of parameters to be edited by pressing buttons S5
○ Using the encoder E3
C
The value is saved automatically.
Tab. 10 - 2nd level menu parameters in PULSED SYNERGIC MIG/MAG mode
PROCEDURE
2 STROKE
SOFT START
2 STROKE SPOT
BURN BACK
POST GAS
SPOT TIME
4 STROKE
SOFT START
4 STROKE B-LEVEL
BURN BACK
POST GAS
3 LEVEL 2 STROKE
SOFT START
2 STROKE SPOT
START 3LEV
START TIME
SLOPE 3LEV 1
SLOPE 3LEV 2
CRATER 3LEV
CRATER TIME
BURN BACK
POST GAS
SPOT TIME
50
, edit the value of the selected parameter
to enter the 2nd level menu.
, edit the value of the selected parameter
PARAMETER
ARC SET (row 1/6)
PRE GAS (row 2/6)
(row 3/6)
(row 4/6)
(row 5/6)
(row 6/6)
ARC SET (row 1/6)
PRE GAS (row 2/6)
(row 3/6)
(row 4/6)
(row 5/6)
B-LEVEL (row 6/6)
ARC SET (row 1/12)
PRE GAS (row 2/12)
(row 3/12)
(row 4/12)
(row 5/12)
(row 6/12)
(row 7/12)
(row 8/12)
(row 9/12)
(row 10/12)
(row 11/12)
(row 12/12)
WELD THE WORLD
MIN DEFAULT
1 SYN
0.0 s 0.0 s
1 % SYN
1 % SYN
0.0 s 1.0 s
0.1 s OFF
1 SYN
0.0 s 0.0 s
1 % SYN
1 % SYN
0.0 s 1.0 s
1 % OFF
1 SYN
0.0 s SYN
1 % SYN
10 % 130 %
0.0 s 0.5 s
0.1 s 0.5 s
0.1 s 0.5 s
10 % 80 %
0.0 s 0.5 s
1 % SYN
0.0 s 1.0 s
0.1 s OFF
and S6
and S6
MAX NOTES
200
10.0 s
100 %
200 %
10.0 s
25.0 s The parameter value is saved
for each welding mode.
200
10.0 s
100 %
200 %
10.0 s
200 % The parameter value is saved
for each welding mode.
200
10.0 s
100 %
200 %
10.0 s
10.0 s
10.0 s
200 %
10.0 s
200 %
10.0 s
25.0 s The parameter value is saved
for each welding mode.
WF-104
WF-108