Characteristics Of The Menu Levels; 1St Level; 2Nd Level - Weco WF-104 Instruction Manual

C . 006.0001.0940
od
16/04/2018 V.2.25
ENGLISH
9

CHARACTERISTICS OF THE MENU LEVELS

9.1 1ST LEVEL

The menu shows the setting of the most important welding parameters (or synergic settings) relative to
the selected welding process.
Acronym of the selected welding
process.
MAT: This parameter sets the
material of the welding wire uti-
lised.
GAS: This parameter sets the
type of gas utilised for welding.
Name of loaded JOB.

9.2 2ND LEVEL

For each process selection the menu shows the "secondary" welding parameters that can be modified
with respect to their synergic values.
If the type of wire, gas, or diameter is changed within a welding process, the second level parameters
return to their default values.
The changed parameters remain saved for the relative process selection (manual MIG/MAG, synergic,
pulsed synergic, double pulsed synergic ).
To save and retrieve the changes made, utilise the JOBs storage procedure.
When the message DEFAULT is replaced by the let-
ters SYN this means that the value changes in relation
to the selected synergic curve.
Menu level
Selected parameter.
Minimum value (MIN), maxi-
mum value (MAX) and factory
value (DEFAULT) of the select-
ed parameter.
38
WELD THE WORLD
SYN: This code indicates that parameters control is synergic.
MAN: This code indicates that parameters control is manual.
SHORT/SPRAY

MAT SG2/SG3
GAS: 80% Ar / 20% CO2
JOB : FE55 MARIO
When the indicator is """ the parameter val-
ue can be modified.
The value is saved automatically.
After pressing the torch trigger or after 10 sec-
onds without any commands, the indicator
switches to ":".
To reactivate the parameter value editing func-
tion press one of the following buttons:
Arrow cursor.
MENU 2
PRE GAS 
MIN DEFAULT
0.0s 0.0s
SYN
Ø: This parameter sets the di-
ameter of the wire utilised for
welding procedures.
Ø:1.2
R4
R: Type of remote control ena-
bled.
K1
If no remote control is enabled
no message is displayed.
K: Type of lock enabled.
If no Lock is loaded no message
is displayed.
.
X = number of the currently dis-
played menu page.
x / y Y = total number of menu pages.
0.0s
Set value.
MAX
10.0s
WF-104
WF-108