Danfoss VLT HVAC Basic Drive Programming Manual page 63

Parameters
15-43 Software Version
Range:
0 [0 - 0 ] View the software version of the frequency
*
3 3
15-44 Ordered TypeCode
Range:
0 [0 - 0 ] View the type code string used for re-ordering the
*
15-46 Drive Ordering No
Range:
0 [0 - 0 ] View the 8-digit ordering number used for re-
*
15-47 Power Card Ordering No
Range:
0 [0 - 0 ]
*
15-48 LCP Id No
Range:
0 [0 - 0 ]
*
15-49 SW ID Control Card
Range:
0 [0 - 0 ]
*
15-50 SW ID Power Card
Range:
0 [0 - 0 ]
*
15-51 Drive Serial Number
Range:
0 [0 - 0 ]
*
15-53 Power Card Serial Number
Range:
0 [0 - 0 ]
*
15-92 Defined Parameters
Option: Function:
View a list of all defined parameters in the frequency
converter. The list ends with 0.
15-97 Application Type
Range:
0 [0 - 1 ]
*
15-98 Drive Identification
Option: Function:
This parameter contains data used for the MCT-10 Setup
software.
62
Function:
converter.
Function:
frequency converter in its original configuration.
Function:
ordering the frequency converter in its original
configuration.
Function:
View the power card ordering number.
Function:
View the LCP ID number.
Function:
View the control card software version number.
Function:
View the power card software version number.
Function:
View the frequency converter serial number.
Function:
View the power card serial number.
Function:
MG.18.B1.02 - VLT
VLT HVAC Basic Drive Programming Guide
®
is a registered Danfoss trademark