Settings For Rotator Control - Microbit RC-1216H User Manual

USER MANUAL
RC-1216H

Settings for Rotator control

There are only a few settings needed to setup the Rotator control function besides the
standard IP-settings described under Step By Setup. When you do the setup only connect the
12V power do not connect the cables to Rotator.
- Click on the Advanced settings link to the left, When the advanced settings page shows
up, select the rotator function that you want from the "Function type" drop down. We
use Prosistel in the example.
- Click on submit to store the settings.
Ba-RC1216H-PA9
User manual
a
Rev. PA9 – 2014 Sept 10
m crob t
 Microbit 2.0 AB 2010. All rights reserved
73 of 79