Using Setup Microbit Setup Manager To Create A Virtual Serial Port - Microbit RC-1216H User Manual

m crob t
USER MANUAL
RC-1216H

Using Setup Microbit Setup Manager to create a virtual serial port

Start the Microbit Setup Manager (it must be v1.27 or later), select the serial port tab, select
a free serial port, enter the IP address or DDNS hostname and the same TCP port as you set
in the RC-1216H. When all settings are done press save.
Start the Expert PC software
 Microbit 2.0 AB 2010. All rights reserved
Ba-RC1216H-PA9
a
Rev. PA9 – 2014 Sept 10
User manual 58 of 79