Error And Warnings; Aux Sw1 Relay - Microbit RC-1216H User Manual

m crob t
USER MANUAL
RC-1216H

Error and Warnings

If a Fault situation occurs the KPA500 may send a Error message or a Warning which need to
be "Confirmed" before the KPA500 can be used again. In this situation a popup window will
show up with the Error/Warning code. Click on the "Confirm" button to clear the Fault
situation.
Note! You must allow popup windows in your web browser to be able to use this function..

AUX SW1 Relay

At the Advanced settings page there is a Settings where you can decide how the spare relay
output AUX SW1 should behave. It can be set to follow either the Main on/off button or the
on/off button. I use it myself to control a koax relay which switch between the Solid state and
Tube PA.
 Microbit 2.0 AB 2010. All rights reserved
Ba-RC1216H-PA9
a
Rev. PA9 – 2014 Sept 10
User manual 69 of 79