Remoterig Dynamic Dns Service - Microbit RC-1216H User Manual

m crob t
USER MANUAL
RC-1216H

Remoterig dynamic dns service

The Remoterig dynamic dns service only support equipment from Remoterig and Microbit like
the RC-1216H, RRC-1258 and the WebSwitch 1216H etc.
The Remoterig dynamic dns service do not need any registration it's automatically generated
based on the serial number on the equipment.
To activate the Remoterig dynamic dns client select "ddns.remoterig.com" from the drop
down on the Dynamic DNS settings page. Also select a DNS check interval, if your IP address
change often you can select a low value, if it goes month between the changes you can select
a higher value. After that click on "Submit" and "Apply changes", the RRC will restart.
 Microbit 2.0 AB 2010. All rights reserved
Ba-RC1216H-PA9
a
Rev. PA9 – 2014 Sept 10
User manual 27 of 79