System Controller (Rm3-410 And Rm3-420 Models Only); Sc200 System Controller - Eaton RM3-400-0330 Installation And Operation Manual

System Controller (RM3-410 and RM3-420 Models only)

The SC200 or SC100 system controller provides control, communications and alarm functions.
The system controller is supplied pre-configured. Configuration changes can be made with the
keypad, or via a PC connected to the USB connector (SC200) or RS232 (SC100) connector. Or
changes can be made remotely (see External Communications on page 7).
For basic operating information see System Controller on page 33. For further details refer to
the System Controller Operation Handbook (see Related Information on page i).
See Troubleshooting on page
system controller alarms.

SC200 System Controller

The SC200 system controller is an advanced control and monitoring solution which provides a
full suite of communications options, including built-in Ethernet interface, Web server, and
SNMP agent.
Alarm notifications may be by SNMP traps, SMS text messaging, dial-out to PowerManagerII
remote monitoring software, or relay contact closures.
47 in the System Controller Operation Handbook for details of
Copyright © 2007-2010 Eaton Corporation. All Rights Reserved.
IPN 997-00012-62E
Power on LED (green)
Minor alarm LED (yellow)
Critical/Major alarm LED (red)
Color LCD
Soft keys (2)
Navigation keys (4)
USB 1.1 connector (12Mb/s)
Retaining screw
Power and system
communications connector
RS232 connector
Ethernet connector and
status LEDs
June 2010
General Description
5