RM3-400/410/420 Series Installation and Operation Guide
SC100
Start-up screen
SC200 or SC100 Operation using the Keypad and Screen
Keypad Access Security
SC200 System Controller
This feature prevents accidental or unauthorized changes to settings from the SC200 keypad.
36
Approx
20s
First status screen
All active alarms are
All access to change an SC200's settings will be lost if:
•
All communications are disabled (see S3P Access and HTTP/HTTPS Access in
the System Controller Operation Handbook), and
•
Keypad access is Read Only, or PIN Protected and the keypad access PIN is lost.
The SC200 will continue to function, but no configuration changes can be made.
Contact your Eaton dc product supplier or Eaton for advice (see Worldwide Support
on page 79).
Copyright © 2007-2010 Eaton Corporation. All Rights Reserved.
IPN 997-00012-62E
displayed.
June 2010
Main menu
See details on page 62.
LCD
Soft key 1 label (SC200 only)
Soft key 1 (SC200 only)
Navigation keys (Up - Down -
Left - Right)
Soft key 2 (SC200 only)
Soft key 2 label (SC200 only)