Belt Motor Unit; Document Feeding System; Registration Roller - Canon DADF-R1 Service Manual

Chapter 4
4-3) Remove the screw [6], and detach the delivery
motor [7].
[7]
[5]
[4]
F-4-23
If you have replaced the delivery motor, be sure to
adjust the sensor and the delivery motor.

4.3.4 Belt Motor Unit

4.3.4.1 Preparation for Removing the Belt
Motor Unit
1) Remove the front cover.
2) Remove the main cover.
3) Remove the separation motor unit.
4) Remove the pickup motor unit.
4.3.4.2 Removing the Belt Motor Unit
1) Remove the 3 screws [1], and detach the belt
motor unit [2].
[1]
[1]
F-4-24
4-6
[2]
[6]
[1]
[3]
0013-3546
0013-3547
[2]

4.4 Document Feeding System

4.4.1 Registration Roller

4.4.1.1 Preparation for Removing the

Registration Roller

1) Remove the front cover.
2) Remove the main cover.
4.4.1.2 Removing the Registration Roller
1) Remove the 2 screws [1], and detach the reversing
guide [2].
When mounting the reversing guide, do so while
forcing it in the direction of the arrow. If not
mounted properly, it can trigger jams.
[1]
Only when mounting it.
F-4-25
0013-3555
0013-3557
[2]
[1]