Sender's Name - Olivetti OFX 3200 Instruction Manual

SENDER'S NAME

1. Press USER SW.
OPERATING CONFIGURATION
SET-UP PARAMETERS
∨ ∨ ∨ ∨ ∨
2. Press .
OPERATING CONFIGURATION
INSTALLATION PARAMETERS
3. Press START. The display shows the first installation parameter.
INSTALLATION PARAMETERS
SENDER'S NAME
4. Press START again.
SENDER'S NAME
_
On the right-hand side of the display, you can view all the characters in the "Character Set
Table" by pressing the
key to insert it in the sender's name. A space can be entered by pressing the
a mistake, move to the incorrect character using the
clear the entire name and type it again, press the CLEAR key.
SENDER'S NAME
TECNOTEAM_
5. Having entered your name, press START to confirm. Press STOP to terminate the procedure
or follow the "Setting the Installation Parameters" procedure starting from step 5.
A
∧ ∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨ ∨
or key. When the character required appears, press the CONFIRM
M
< < < < <
key and type the correct character. To
> > > > >
key. If you make
11