Table of Contents
Advertisement
To confirm a setting
To skip a parameter
To return to the menu functions on the display
To interrupt a procedure
To interrupt a printing operation
Scroll through the functions on the menus
To interrupt a transaction
To reactivate transmission.
Conditions:
- the document must not be removed from the
ADF
- the number must have been dialled on the
numeric keypad
To automatically print a report after each fax
sent
To switch the error LED off
To automatically print a report after each fax
received
OPERATING PROCEDURES
TRANSMISSION/RECEPTION OPERATIONS
Press START
Press START
Press STOP
Press STOP once or twice
Press STOP
∧ ∧ ∧ ∧ ∧
∨ ∨ ∨ ∨ ∨
Press
or
Press STOP and LINE STATUS together.
Press PAUSE/REDIAL
Enable the "LAST TX REPORT" parameter in
the operating configuration (see the "Setting
the Set-up Parameters" section)
Press LINE STATUS and STOP at the same
time
Enable the "LAST RX REPORT" parameter in
the operating configuration (see the "Setting
the Set-up Parameters" section)
55
Advertisement
Table of Contents
