Table of Contents
Advertisement
MESSAGE
08:CHECK THE DOCUMENT
09:DOCUMENT NOT PRESENT
DOCUMENT ALREADY IN USE
10:ERRORS WHILE RECEIVING
11:IMPOSSIBLE RECEPTION
MEMORY FULL
12:SECURE POLLING
NOT ALLOWED
13:ERRORS WHILE POLLING
14:CONFID. TX
NOT ALLOWED
15:CLOSED NETWORK
REMOTE ID NOT QUALIFIED
16:
17:INCORRECT PAGE COUNT
18:SYSTEM ERROR
19:IMPOSSIBLE CONNECTION
ENABLE REM. DIAGNOSTICS
20:CONNECTION IS INCOMPATIBLE
CHECK WITH THE OTHER PARTY
21:'STOP' PRESSED
22:LINE BUSY
23:IMPOSSIBLE RECEPTION
CHECK PAPER/INK/MEMORY
108
MEANING
The scanner cannot read the
document.
The document is already being
used for another operation or has
been deleted.
The facsimile machine detects an
error during reception.
The facsimile machine does not
have
enough
space
in
memory to receive the document.
The secure polling IDs do not
correspond.
The remote facsimile machine
has no document to be sent.
The remote facsimile machine is
not compatible or has no private
mailbox.
The correspondent's number is
not included in the list of those
belonging to the network.
Not used.
The facsimile machine detects
that the number of pages set does
not correspond to the number of
pages actually sent.
The
facsimile
machine
detected an error in the operating
sequence.
The customer engineering service
has made a call to carry out a
diagnostic test but the REMOTE
DIAG. parameter is not enabled.
The passwords do not correspond
or the receiving facsimile machine
has interrupted the connection.
You interrupted the transaction.
The busy tone was detected
before or after the connection.
The facsimile machine cannot
receive because the paper or ink
has run out and the SUBSTITUTE
RECEPTION set-up parameter is
not enabled.
ACTION
Remove the document from the
ADF
and
reinsert
retransmitting.
Make sure that no activities are
being carried out on the document
or store the document again
before transmitting.
Contact the correspondent and
ask him to send the document
again.
Clear unwanted documents from
the
the memory.
Contact the correspondent and
check that the polling IDs stored
are correct.
Contact the correspondent.
Contact the correspondent.
Contact the correspondent and
check the facsimile numbers.
Retransmit.
has
Switch the facsimile machine off
and on again.
Enable the set-up parameter
REMOTE DIAG.
Contact the correspondent.
None.
Reattempt transmission.
Restore the conditions that enable
received documents to be printed
or enable the set-up parameter
SUBSTITUTE RECEPTION.
it
before
Advertisement
Table of Contents
