Profienergy Measured Values - Siemens SINAMICS S120 Series Function Manual

Query commands
Get_Measurement_Values
Get_Measurement_Values_with_obj
ect_number
5.10.3

PROFIenergy measured values

Table 5- 6 Overview of the PROFIenergy measured values
PROFIenergy measured
value
ID Name
34 Active power
166 Power factor
200 Active energy
import
Communication
Function Manual, 12/2018, 6SL3097-5BD00-0BP0
PROFIenergy accuracy
Domain Class
1 12
1 12
2 11
Description
Returns the requested measured value using the measured
value ID:
For power measured values:
•
The command addresses the sum of the measured value
over all control drive objects.
For energy measured values:
•
The command returns the sum of the measured value over
all control drive objects.
For power factors:
•
This measured value is supported only for a SINAMICS
with a control drive object.
Returns the requested measured values using the measured
value ID and the object number. The object number corre-
sponds to the drive object ID.
The drive object ID of the Control Unit is used to address the
measured values as with "Get_Measurement_Value".
Unit SINAMICS source parameters
Parameters
W r0032
1 r0038
Wh r0039[1]
Communication via PROFINET IO
5.10 PROFIenergy
Value range
Name
Active power Largest value for
smoothed r2004 of all drive
objects
Smoothed pow- 0 ... 1
er factor
Energy accept- -
ed
159