Omron E5*D Series Connection Manual page 57

9.7.2. Destination Device Error
These error codes are used for errors in the Destination Device.
●Destination Device error code [Output_CWFErrCode1, Output_CWFErrCode2]
[Output_CWFErrCode1] (End code)
Bit 15
End code
00 Normal completion
0F FINS command error
10 Parity error
11 Framing error
12 Overrun error
13 BCC error
14 Format error
16 Sub-address error
18 Frame length error
8 7
#00 Fixed "**" End code
Name
The command ended normally without error.
The specified FINS command could not be
executed.
The FINS response code should indicate why
the command could not be executed.
The sum total of bits whose received data is "1"
does not match the set value of the
"communications parity" bit.
Stop bit is "0".
An attempt was made to transfer new data
when the reception data buffer was already full.
The calculated BCC value is different from the
received BCC value.
- The command text contains characters other
than 0 to 9, and A to F.
- There was no SID and command text, or there
was no command text.
- "MRC/SRC" not included in command text.
- Illegal (unsupported) subaddress
- There was no subaddress, SID and command
text.
- Subaddress was less than two characters,
and there was no SID and command text
The received frame exceeds the specified
(supported) number of bytes.
0
Description
9．Program
Priority
None
8
2
1
3
5
7
6
4
54