7.3.5.
Transferring the Unit Settings
Transfer the setting data of the Serial Communications Unit.
1
Select Online from the
Controller Menu.
2
When an online connection is
established, a yellow line is
displayed under the toolbar.
3
Select Mode - PROGRAM
Mode from the Controller Menu.
4
A confirmation dialog box is
displayed. Confirm that there is
no problem, and click Yes.
5
PROGRAM mode is displayed
in the Controller Status Pane.
6
Double-click CPU/Expansion
Racks under Configurations
and Setup in the Multiview
Explorer.
Select Serial Communications
Unit displayed on the CPU Rack
configuration.
Click Edit Special Unit
Settings.
7.Serial Communications Connection Procedure
27